A port scanner (such as nmap) is a piece of software designed to search a network host for open ports. Cracker can use nmap to scan your network before starting attack. You can always see scan patterns by visiting /var/log/messages. But, I recommend the automated tool called psad - the port scan attack detector under Linux which is a collection of lightweight system daemons that run on Linux machines and analyze iptables log messages to detect port scans and other suspicious traffic.
psad makes use of Netfilter log messages to detect, alert, and (optionally) block port scans and other suspect traffic. For tcp scans psad analyzes tcp flags to determine the scan type (syn, fin, xmas, etc.) and corresponding command line options that could be supplied to nmap to generate such a scan. In addition, psad makes use of many tcp, udp, and icmp signatures contained within the Snort intrusion detection system.
Install psad under Debian / Ubuntu Linux
Type the following command to install psad, enter:$ sudo apt-get update
$ sudo apt-get install psadOr You can Download it from :- http://www.cipherdyne.org/psad/download/
Configure psad
Open /etc/syslog.conf file, enter:# vi /etc/syslog.confAppend following code
kern.info |/var/lib/psad/psadfifoAlternatively, you can type the following command to update syslog.conf:
echo -e ’kern.info\t|/var/lib/psad/psadfifo’ >> /etc/syslog.confpsad Syslog needs to be configured to write all kern.info messages to a named pipe /var/lib/psad/psadfifo. Close and save the file. Restart syslog:
# /etc/init.d/sysklogd restart
# /etc/init.d/klogdThe default psad file is located at /etc/psad/psad.conf:
# vi /etc/psad/psad.confYou need to setup correct email ID to get port scan detections messages and other settings as follows:
EMAIL_ADDRESSES vivek@nixcraft.in;Set machine hostname (FQDN):
HOSTNAME server.nixcraft.in;If you have only one interface on box (such as colo web server or mail server), sent HOME_NET to none:
HOME_NET NOT_USED; ### only one interface on boxYou may also need to adjust danger levels as per your setup. You can also define a set of ports to ignore, for example to have psad ignore udp ports 53 and 5000, use:
IGNORE_PORTS udp/53, udp/5000;You can also enable real time iptables blocking, by setting following two variables:
ENABLE_AUTO_IDS Y; IPTABLES_BLOCK_METHOD Y;psad has many more options, please read man pages for further information. Save and close the file. Restart psad:
# /etc/init.d/psad restartUpdate iptables rules
psad need following two rules with logging enabled:iptables -A INPUT -j LOG iptables -A FORWARD -j LOGHere is my sample Debian Linux desktop firewall script with logging enabled at the end:
#!/bin/bash IPT="/sbin/iptables" echo "Starting IPv4 Wall..." $IPT -F $IPT -X $IPT -t nat -F $IPT -t nat -X $IPT -t mangle -F $IPT -t mangle -X modprobe ip_conntrack BADIPS=$(egrep -v -E "^#|^$" /root/scripts/blocked.fw) PUB_IF="eth0" #unlimited $IPT -A INPUT -i lo -j ACCEPT $IPT -A OUTPUT -o lo -j ACCEPT # DROP all incomming traffic $IPT -P INPUT DROP $IPT -P OUTPUT DROP $IPT -P FORWARD DROP # block all bad ips for ip in $BADIPS do $IPT -A INPUT -s $ip -j DROP $IPT -A OUTPUT -d $ip -j DROP done # sync $IPT -A INPUT -i ${PUB_IF} -p tcp ! --syn -m state --state NEW -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "Drop Syn" $IPT -A INPUT -i ${PUB_IF} -p tcp ! --syn -m state --state NEW -j DROP # Fragments $IPT -A INPUT -i ${PUB_IF} -f -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "Fragments Packets" $IPT -A INPUT -i ${PUB_IF} -f -j DROP # block bad stuff $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL FIN,URG,PSH -j DROP $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL ALL -j DROP $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL NONE -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "NULL Packets" $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL NONE -j DROP # NULL packets $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags SYN,RST SYN,RST -j DROP $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags SYN,FIN SYN,FIN -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "XMAS Packets" $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP #XMAS $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags FIN,ACK FIN -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "Fin Packets Scan" $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags FIN,ACK FIN -j DROP # FIN packet scans $IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL SYN,RST,ACK,FIN,URG -j DROP # Allow full outgoing connection but no incomming stuff $IPT -A INPUT -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT $IPT -A OUTPUT -o eth0 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT # allow ssh only $IPT -A INPUT -p tcp --destination-port 22 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 22 -j ACCEPT # allow incoming ICMP ping pong stuff $IPT -A INPUT -p icmp --icmp-type 8 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT $IPT -A OUTPUT -p icmp --icmp-type 0 -m state --state ESTABLISHED,RELATED -j ACCEPT # No smb/windows sharing packets - too much logging $IPT -A INPUT -p tcp -i eth0 --dport 137:139 -j REJECT $IPT -A INPUT -p udp -i eth0 --dport 137:139 -j REJECT # Log everything else # *** Required for psad **** $IPT -A INPUT -j LOG $IPT -A FORWARD -j LOG $IPT -A INPUT -j DROP # Start ipv6 firewall # echo "Starting IPv6 Wall..." /root/scripts/start6.fw exit 0
How do I view port scan report?
Simply type the following command:# psad -SSample output (some of the sensitive / personally identified parts have been removed):
[+] psadwatchd (pid: 2540) %CPU: 0.0 %MEM: 0.0
Running since: Sun Jul 27 07:14:56 2008
[+] kmsgsd (pid: 2528) %CPU: 0.0 %MEM: 0.0
Running since: Sun Jul 27 07:14:55 2008
[+] psad (pid: 2524) %CPU: 0.0 %MEM: 0.8
Running since: Sun Jul 27 07:14:55 2008
Command line arguments: -c /etc/psad/psad.conf
Alert email address(es): radhika.xyz@xxxxxxxx.co.in
src: dst: chain: intf: tcp: udp: icmp: dl: alerts: os_guess:
117.32.xxx.149 xx.22.zz.121 INPUT eth0 1 0 0 2 2 -
118.167.xxx.219 xx.22.zz.121 INPUT eth0 1 0 0 2 2 -
118.167.xxx.250 xx.22.zz.121 INPUT eth0 1 0 0 2 2 -
118.167.xxx.5 xx.22.zz.121 INPUT eth0 1 0 0 2 2 -
122.167.xx.11 xx.22.zz.121 INPUT eth0 4642 0 0 4 50 -
122.167.xx.80 xx.22.zz.121 INPUT eth0 0 11 0 1 2 -
123.134.xx.34 xx.22.zz.121 INPUT eth0 20 0 0 2 9 -
125.161.xx.3 xx.22.zz.121 INPUT eth0 0 9 0 1 4 -
125.67.xx.7 xx.22.zz.121 INPUT eth0 1 0 0 2 2 -
190.159.xxx.220 xx.22.zz.121 INPUT eth0 0 9 0 1 3 -
193.140.xxx.210 xx.22.zz.121 INPUT eth0 0 10 0 1 2 -
202.xx.23x.196 xx.22.zz.121 INPUT eth0 0 13 0 1 10 -
202.xx.2x8.197 xx.22.zz.121 INPUT eth0 0 20 0 2 17 -
202.97.xxx.198 xx.22.zz.121 INPUT eth0 0 17 0 2 12 -
202.97.xxx.199 xx.22.zz.121 INPUT eth0 0 18 0 2 15 -
202.97.xxx.200 xx.22.zz.121 INPUT eth0 0 17 0 2 14 -
202.97.xxx.201 xx.22.zz.121 INPUT eth0 0 15 0 2 12 -
202.97.xxx.202 xx.22.zz.121 INPUT eth0 0 21 0 2 16 -
203.xxx.128.65 xx.22.zz.121 INPUT eth0 12 0 0 2 6 Windows XP/2000
211.90.xx.14 xx.22.zz.121 INPUT eth0 1 0 0 2 2 -
213.163.xxx.9 xx.22.zz.121 INPUT eth0 0 0 1 2 2 -
221.130.xxx.124 xx.22.zz.121 INPUT eth0 0 35 0 2 31 -
221.206.xxx.10 xx.22.zz.121 INPUT eth0 0 33 0 2 21 -
221.206.xxx.53 xx.22.zz.121 INPUT eth0 0 33 0 2 27 -
221.206.xxx.54 xx.22.zz.121 INPUT eth0 0 39 0 2 26 -
221.206.xxx.57 xx.22.zz.121 INPUT eth0 0 33 0 2 19 -
60.222.xxx.146 xx.22.zz.121 INPUT eth0 0 40 0 2 33 -
60.222.xxx.153 xx.22.zz.121 INPUT eth0 0 14 0 1 11 -
60.222.xxx.154 xx.22.zz.121 INPUT eth0 0 18 0 2 15 -
Netfilter prefix counters:
"SPAM DROP Block": 161519
"Drop Syn Attacks": 136
Total scan sources: 95
Total scan destinations: 1
Total packet counters:
tcp: 5868
udp: 164012
icmp: 2How do I remove automatically blocked ips?
Simply type the following command to remove any auto-generated firewall block# psad -FHow do I view detailed log for each IP address?
Go to /var/log/psad/ip.address/ directory. For example, view log for IP address 11.22.22.33, enter:# cd /var/log/psad/11.22.22.33
# ls -lSample output:
-rw------- 1 root root 2623 2008-07-30 13:02 xx.22.zz.121_email_alert -rw------- 1 root root 32 2008-07-30 13:02 xx.22.zz.121_packet_ctr -rw------- 1 root root 0 2008-07-29 00:27 xx.22.zz.121_signatures -rw------- 1 root root 11 2008-07-30 13:02 xx.22.zz.121_start_time -rw------- 1 root root 2 2008-07-30 13:02 danger_level -rw------- 1 root root 2 2008-07-30 13:02 email_count -rw------- 1 root root 1798 2008-07-29 00:27 whois
No comments:
Post a Comment